Chủ đề
Home
/
Engineering
/

Câu hỏi

Short pieces of wood can be turned into a larger, more usable piece by joining them with __ A. butt joint B. end-to-end half-lap joints C. biscuit joints D. rabbet joint

Xác minh chuyên gia

Giải pháp

4 (313 Votes)
Vonda Costa Professional · Tutor for 6 years

Answer

B. end-to-end half-lap joints

Explanation

1. Identify the joint type for joining short pieces end-to-end End-to-end half-lap joints are specifically designed to join two short pieces of wood into a longer, usable piece by overlapping and interlocking their ends.

Similar Questions

  • For a None pump handle detection configuration, which timer would end a transaction? No Fuel Timer End Fuel Timer Pump Finish Timer No Hose Timer

  • What needs to be done at the FMU if the display reads "Turn Pump Handle On?" Change the divide ratio Power reset the FMU Change pump handle detection to End Only Perform a counts test

  • One piece is laid over another and the pieces are fastened together where they touch. lap joint dowel joint biscuit joint Wood joint in which the piece that fits into the dado is notched so that the joint does not show from the front. dado joint blind dado joint edge butt joint

  • Matching 5 points Match the Technical term with the Informal term of welding processes. SMAW square GTAW square GMAW square FCAW square

  • Roughening the faying surfaces tends to have which one of the following effects on the strength of an adhesively bonded joint: increase decrease no effect

Tìm hiểu về
  • Chính sách bảo mật
  • Điều khoản và điều kiện
  • Về chúng tôi
Tải APP xuống

D3 DIMENSION TECHNOLOGY PTE. LTD. | Địa chỉ:1-1A Tôn Đức Thắng - Quận 1