Heavy duty relays are not suitable as switching relays because they have: Larger contacts with more resistance. Smaller contacts with more resistance. Smaller contacts with less resistance. Larger contacts with less resistance.

When GMAW is used for the root pass in an open-root V-groove weld, the transfer mode selected is typically __ arc transfer A. short-circuiting B. thermal C. spray D. globular

What do turbocharged engines use to generate vacuum for purge? A) Leak Detection Module B) Carbon Canister C) EVAP Purge Valve D) EVAP Ejector

The EVAP Purge Valve: A) Performs the EVAP check monitor. B) Is used by turbocharged engines to generate vacuum for purge. C) Is duty cycled so that fresh air is drawn in to purge stored vapors. D) Stores fuel vapors until they can be consumed by the engine during combustion.

What step in operation occurs after fuel tank vapors are routed to the carbon canister? A) The EVAP system captures gasoline vapors. B) The air-vapor mixture is purged into the engine to be burned. C) When the purge valve is duty cycled, fresh air is drawn to the canister. D) The vapors escape into the atmosphere.

The centrifugal pump part that transfers energy from the shaft to the water is the Impeller Shaft sleeve Shroud Volute

Which suspension is a torque arm? A Dependent B Independent

Which of the following guidelines is not appropriate for working with Jo-blocks? Use the blocks in a temperature-controlled room. Handle the blocks as little as possible. Store the blocks together in their adhered position when finished. Wipe the blocks with a soft cloth treated with oil.

8) The router is an electric tool that can do many things . What are the two things we use it for in this class? A) To cut the dado and to cut the leg design B) To cut the top and to cut the edge treatment C) To cut the dado and to cut the edge treatment.

wheels Choose the category below that the above fact relates to. cooling system electrical system powertrain braking system

The "A" in "BESAFE"safe stands for arc flash,which: A. Is a sudden release of electrical energy B. Can reach temperatures of 35,000 degrees Fahrenheit C. Gives off thermal radiation and bright intense light D. Can produce pressure waves by rapidly heating air, causing a blast E. All the above