Q7: On right side pistons the arrow on the top of the piston and the dimple on the rod __ and on left side pistons the arrow on the top of the piston and the dimple on the rod __ A. are on opposite sides / are on the same side B. face the outside of the engine/ face the inside of the engine C. face the same direction/ are on opposite sides D. face the inside of the engine/ face the outside of the engine

An all wheel drive vehicle increases traction and allows the driver to better manage the vehicle in inclement weather. True False

Which is a likely reason a jacket might contain interfacing? to help it keep its shape to avoid the need for dry cleaning to make the garment easier to construct to absorb odors

The biggest maintenance problem in pneumatic systems is __ Rusted components Noisy components Overheating Air leakage

Never stand directly behind the saw blade. True False

Technician A says that if the vehicle battery is below 12.4 volts when testing with a voltmeter it should be charged with a smart battery charger . Technician B says that correct tire readings ; are listed on a placard on the driver's side door frame. Who is correct? A) Technician A only B) Technician B only C) Both Technician A and B D) Neither Technician A nor B

The recommended tire air pressure can typically be found: In the owner's manual On a placard typically located on the driver's doorjamb On the side of the tire Both A and B

Who perfected the steam engine for other uses? Thomas Newcomen John Kay Nikola Tesla Robert Stephenson James Watt Rewatch

Select the choice that best completes the following statement. The safest form of isolation method is: a) Single block valve and line blank b) Double block valve and controlled bleed c) Engineered process plugs d) Control valves

What component can mask internal engine oil leaks? Catalytic converter Oil pressure sending unit Oil diverter valve Oil bypass valve

With the number of different SMAW electrodes available , what is the best tool to determine the most appropriate way to use the electrode you have selected? Guess the settings and polarity Use a generic settings chart Refer to the manufacturer's specification sheet for that specific electrode Use advice from other people