QuestionMay 21, 2025

A power pump is shut down by: Switching it off. D Opening all the pump valves. D Running it as low load or no load for 10 or 15 minutes to cool the engine. Shutting down the driver.

A power pump is shut down by: Switching it off. D Opening all the pump valves. D Running it as low load or no load for 10 or 15 minutes to cool the engine. Shutting down the driver.
A power pump is shut down by:
Switching it off. D
Opening all the pump valves.
D
Running it as low load or no load for 10 or 15 minutes to cool the engine.
Shutting down the driver.

Solution
4.5(288 votes)

Answer

The power pump is shut down by following these steps in sequence. Explanation 1. Switch off the pump Turn off the power supply to stop the pump operation. 2. Open all pump valves Ensure all valves are open to relieve pressure and prevent backflow. 3. Run at low/no load Operate the pump at minimal load for 10-15 minutes to cool down the engine. 4. Shut down the driver Turn off the driver to complete the shutdown process.

Explanation

1. Switch off the pump<br /> Turn off the power supply to stop the pump operation.<br /><br />2. Open all pump valves<br /> Ensure all valves are open to relieve pressure and prevent backflow.<br /><br />3. Run at low/no load<br /> Operate the pump at minimal load for 10-15 minutes to cool down the engine.<br /><br />4. Shut down the driver<br /> Turn off the driver to complete the shutdown process.
Click to rate:

Similar Questions