QuestionDecember 14, 2025

What needs to be done at the FMU if the display reads "Turn Pump Handle On?" Change the divide ratio Power reset the FMU Change pump handle detection to End Only Perform a counts test

What needs to be done at the FMU if the display reads "Turn Pump Handle On?" Change the divide ratio Power reset the FMU Change pump handle detection to End Only Perform a counts test
What needs to be done at the FMU if the display reads "Turn Pump Handle On?" Change the divide ratio Power reset the FMU Change pump handle detection to End Only Perform a counts test

Solution
3.7(301 votes)

Answer

Perform a counts test Explanation 1. Identify purpose of message The message “Turn Pump Handle On” indicates the FMU is waiting to detect the handle activation signal from the pump. It checks the proper detection and communication between handle and FMU. 2. Determine appropriate action To confirm the detection circuit works, a **counts test** verifies signal inputs and outputs, ensuring correct handle recognition. Other listed actions don’t address handle detection.

Explanation

1. Identify purpose of message <br /> The message “Turn Pump Handle On” indicates the FMU is waiting to detect the handle activation signal from the pump. It checks the proper detection and communication between handle and FMU. <br />2. Determine appropriate action <br /> To confirm the detection circuit works, a **counts test** verifies signal inputs and outputs, ensuring correct handle recognition. Other listed actions don’t address handle detection.
Click to rate:

Similar Questions